Metric And Rural Poly Pipe

Metric & Rural Poly Pipe

Metric and Rural Poly Pipe are durable polyethylene pipes designed for a wide range of water transfer, irrigation, stock watering and agricultural applications. Manufactured from high-quality PE100 material, these pipes offer excellent flexibility, UV resistance and long service life in Australia's harsh conditions.

Metric Poly Pipe is measured by its outside diameter and is commonly used with metric compression fittings such as Plasson and Philmac metric fittings. Available in a range of pressure ratings including PN8, PN10, PN12.5 and PN16.

Rural Poly Pipe is measured by its inside diameter and is commonly identified by its green stripes. Designed for rural water systems and stock watering applications, Rural Poly Pipe is typically rated to PN8 (800kPa).

Common Sizes & Typical Flow Rates*

Pipe Size Typical Flow Range
20mm Metric Up to 35 L/min
25mm Metric / 1" Rural Up to 65 L/min
32mm Metric / 1¼" Rural Up to 110 L/min
40mm Metric / 1½" Rural Up to 180 L/min
50mm Metric / 2" Rural Up to 300 L/min
63mm Metric Up to 450 L/min

Metric and Rural Poly Pipe are ideal for stock water reticulation, irrigation systems, tank connections, pump installations and water transfer applications where reliability and long-term performance are essential.

Disclaimer: Flow rates shown are intended as a general guide only and should not be relied upon as guaranteed performance. Actual flow rates will vary depending on pressure, pipe length, elevation, fittings, valves and overall system design. Pressure ratings are based on manufacturer specifications at 20°C and may vary depending on operating conditions.